Chemical industry 
Food industry 
Light industry 
Mechanical engineering 
Metallurgy 
Mining industry 
Is Negotiable
The cable VBbShv (number of cores and cross-section in the range)
DONPROMCABEL, Ltd
GOST 16442-80.
It is intended for transmission and distribution of electric power in stationary installations for rated alternating voltage 660 V and 1000 V at 50 Hz, single-core cables are used in DC networks.
For laying in the ground (trenches), rooms, tunnels, channels, mines (except for laying in blocks), and also in the open air unless the cable is subjected to significant tensile forces, but in case of a danger of mechanical damage during operation. Cables of the brand VBbShv do not spread combustion in single laying.
- A current-carrying vein - copper, single-wire or multiwire of a round or sectoral forms of 1 or 2 classes in accordance with GOST 22483.
- Insulation - made of polyvinyl chloride (PVC). Isolated strands of multi-core cables have a distinctive coloring. The insulation of the zero veins is blue. Isolation of cores of grounding is carried out with bicolour (green-yellow coloring).
- Twisting - insulated conductors of two-, three-, four- and five-core cables are twisted; two-core cables have veins of the same cross-section, three-, four- and five-core cables have all the same conductor strands or one vein of smaller cross-section (earth conductor or zero).
- Belt insulation - in cables with a protective cover of type VBbShv it is pressed out from PVX plastic; in cables of the brand VBbShng from PVX plastic of low combustibility. The twisted strands of VBbShzng cables with round and sector veins have been turned over with extruded waist insulation made of low-combustible polyvinylchloride plasticite which should fill the gaps between the insulated conductors.
- Protective cover - type VBbShv: - armor made of two steel strips, superimposed so that the top band covers the gaps between the turns of the lower tape; - protective hose, extruded from PVX plastic.
Is Negotiable
The wire PVS (number of cores and cross-section in the range)
DONPROMCABEL, Ltd
Wire PVS is used in the manufacture of household appliances and electrical tools and appliances. It is used to connect to the network in the design of washing machines, television sets of refrigerators, all kinds of metalwork and building electric tools, other machines and devices. It also goes for the manufacture of network adapters, extension cables, etc.
Flexible wire for voltage up to 380V with twisted copper veins in PVC insulation with PVC sheath. Each vein consists of copper conductors, the core class must be at least 4.
The number of wires can be from two to five, the minimum cross-sectional area is 0,75 mm², the maximum cross-section of cable plants is 16 mm². The direction of twist is left, twisting is performed without filler. Color of veins insulation: white, gray, blue, dark blue, green, red, brown and yellow. On top of them there is a PVC-plastic sheath applied by extrusion and does not spread the combustion in a single installation. It must necessarily fill the gaps between the wires, giving the wire a round shape.
The threshold values of the basic mechanical and electrical characteristics are normalized by the standard GOST 7399-97. As for specific values for each manufacturer, they can differ within the specified limits. Therefore, accurate data on diameters, thickness of insulation, mass and other indicators should be taken from the documentation accompanying the batch or the manufacturer's catalogs.
Is Negotiable
The cable АVBbShv(number of cores and a cross-section in assortment)
DONPROMCABEL, Ltd
GOST 16442-80.
It is intended for transmission and distribution of electric power in stationary installations for rated alternating voltage 660 V and 1000 V at 50 Hz, single-core cables are used in DC networks.
For laying in the ground (trenches), rooms, tunnels, channels, mines (except for laying in blocks), and also in the open air unless the cable is subjected to significant tensile forces, but in case of a danger of mechanical damage during operation. Cables of the brand VBbShv do not spread combustion in single laying.
- A current-carrying vein - copper, single-wire or multiwire of a round or sectoral forms of 1 or 2 classes in accordance with GOST 22483.
- Insulation - made of polyvinyl chloride (PVC). Isolated strands of multi-core cables have a distinctive coloring. The insulation of the zero veins is blue. Isolation of cores of grounding is carried out with bicolour (green-yellow coloring).
- Twisting - insulated conductors of two-, three-, four- and five-core cables are twisted; two-core cables have veins of the same cross-section, three-, four- and five-core cables have all the same conductor strands or one vein of smaller cross-section (earth conductor or zero).
- Belt insulation - in cables with a protective cover of type VBbShv it is pressed out from PVX plastic; in cables of the brand VBbShng from PVX plastic of low combustibility. The twisted strands of VBbShzng cables with round and sector veins have been turned over with extruded waist insulation made of low-combustible polyvinylchloride plasticite which should fill the gaps between the insulated conductors.
- Protective cover - type VBbShv: - armor made of two steel strips, superimposed so that the top band covers the gaps between the turns of the lower tape; - protective hose, extruded from PVX plastic.
Is Negotiable
The cable AVVG (number of cores and cross-section in the range)
DONPROMCABEL, Ltd
GOST 16442-80.
Power cables АВВГ, АВВГ-П - aluminum veins in the polyvinylchloride insulation with a voltage of 1000 volts (1kV).
Characteristics of power VVG, VVG-P cables - determination of their application for transmission of electric energy in stationary installations for rated voltage up to 1 kV. Amplitude of the working temperature of the environment is described in the range from -50 to +50 degrees Celsius.
VVG, VVG-P cables are used to supply to electrical equipment and lighting with power both inside buildings and on external cable structures and electrical appliances. Technical characteristics allow to use it even at objects with relative humidity up to 98% (shafts, etc.), and also for high-altitude installation by air. Due to this versatility, this conductor is the most popular material for laying networks.
The VVG cable is a wire made of one or more conductive wires, each of which has its own insulating layer. These veins are twisted together and are laid inside a common insulating shell.
VVG-P cable is a wire made of several conductive wires, each of which has its own insulating layer. These veins lie parallel to each other and are laid inside a common insulating shell.
Is Negotiable
The cable VVG (number of cores and cross-section in the range)
DONPROMCABEL, Ltd
GOST 16442-80.
Power cables АВВГ, АВВГ-П - aluminum veins in the polyvinylchloride insulation with a voltage of 1000 volts (1kV).
Characteristics of power VVG, VVG-P cables - determination of their application for transmission of electric energy in stationary installations for rated voltage up to 1 kV. Amplitude of the working temperature of the environment is described in the range from -50 to +50 degrees Celsius.
VVG, VVG-P cables are used to supply to electrical equipment and lighting with power both inside buildings and on external cable structures and electrical appliances. Technical characteristics allow to use it even at objects with relative humidity up to 98% (shafts, etc.), and also for high-altitude installation by air. Due to this versatility, this conductor is the most popular material for laying networks.
The VVG cable is a wire made of one or more conductive wires, each of which has its own insulating layer. These veins are twisted together and are laid inside a common insulating shell.
VVG-P cable is a wire made of several conductive wires, each of which has its own insulating layer. These veins lie parallel to each other and are laid inside a common insulating shell.