Chemical industry 
Food industry 
Light industry 
Mechanical engineering 
Metallurgy 
Mining industry 
Is Negotiable
The tillage equipment: diskettes, disc harrows, cultivators, rollers, spare parts for agricultural machinery (AG, UDA, PD, DB, BDT), spare parts for agricultural machinery to order
MANUFACTORING COMPANY “DONBAS-AGROMASH”, PRIVATE ENTERPRISE
The nomenclature of made production:
- Agricultural tillage machinery
- Spare parts for agricultural machinery
- Spare parts for order
Is Negotiable
Fogging agents and fogging systems
PE "Plant "FAKEL"
The fogging agents V-4 are successfully used in the nurseries of green cuttings. The maximum return in this industry can be obtained by using a classic breeding ground for green propagation. It is designed as a greenhouse or several greenhouses, mounted in a greenhouse where the microclimate is maintained.
Is Negotiable
System of drip irrigation for greenhouses, gardens, fields and all components to it
PE "Plant "FAKEL"
Drip irrigation systems using integrated emitter drip irrigation lines - ELCO are designed for use in vegetable fields, in gardens and vineyards, nurseries, in greenhouses and glasshouses.
Drip irrigation systems with the use of external droppers which are compensated for pressure K4x2.0; К4х2,2; K4x2.5; K2x3 are designed for irrigation and plant nutrition in greenhouses, glasshouses, mushroom pickets, in gardens and vineyards planted on slopes. Uncompanyed by the pressure dropper KS-2 and KS-4 (self-powered), it is advisable to use on private gardens, greenhouses, vineyards, etc. They are designed to work at low pressures, incl. in self-powered systems.
All systems of drip irrigation with their variety of designs and purposes have one common feature - metering channels. Dispensing channels in any system are the most vulnerable elements because they are represented as a zigzag labyrinth that creates turbulent vortices in water passing through them. The cross-sectional area of the various metering channels can be from 0.1 mm2 (for disposable tapes) to 4 mm2 (for external compensated droppers). Integrated pipes and tapes have a direct dependence: the longer the dosing channel, the greater the cross-sectional area it can have. And conversely. The larger the cross-section of the metering channel, the more resistant it is to clogging and salinization.
All drip irrigation systems produced by the plant are assembled as a constructor in the following sequence:
- Pump and filter station. The pump station (pump) can be fed from an intermediate reservoir, from a well, from an open reservoir. If from an open reservoir, the filtration station requires a pre-filter - sand and gravel to remove organic contaminants from the water and a second stage filter - disc or screen filter with a filtration quality of not more than 140 mkm (disc is recommended).
- Feeding node. It can be injector - PU, injector with a filter - PU-F, automatic - RU-F3. The PU is mounted between the pump and the filter station. PU-F and RU-F3 can be mounted after the filter station as there are disk filters in their composition.
- The main pipeline. It is designed to transport water from the filter station to the distribution nodes - UR. A pipe with a diameter of 32 - 160 mm can be used as a main pipeline from polymers or other materials resistant to corrosion and aggressive solutions. They can be buried in 0.15-1.5 m.
- Distribution nodes are designed to control irrigation by sector. These are the performing mechanisms that open / close water supply to the sectors. They can be based on electromagnetic valves, ball valves, valves or gate valves. They are always installed between the main and distributing pipelines.
- Dispensing pipelines are designed to distribute water along the ELCO or supply pipelines with external droppers installed on it. They are connected to the distribution pipelines with the help of the starting fittings, the threaded clamps or mini-cranes. The end points of the distribution pipelines are suppressed with special stubs.
It is used pipes from polyethylene VD in diameter 40 - 75 mm with wall thickness 3,7 - 4,5 mm for distributing pipelines. It is allowed to use a LDPE pipe dia. 32 x 3 mm but the reliability of fastening of the unions of starting or mini-cranes in them reduces.
Feeding pipelines are made of HP polyethylene with a diameter of 16, 20, 22 mm with a wall thickness of 1.8-2.2 mm. Holes are pierced and external droppers are inserted in them, capillaries from which are strengthened with means of tips near plants.
Is Negotiable
Feeding nodes - PU
PE "Plant "FAKEL"
Feeding nodes - PU of various modifications are made on the basis of injectors with a nozzle diameter from 3 to 12 mm.
The PU consists of an inlet and an outlet of diam. 32, 40, 50, 63 mm separated by a valve or a tap. Between the inlet and outlet (parallel to the valve) an injector (jet pump) is mounted with a non-return valve or with a flow indicator IR (rotameter). At the inlet connection of the non-return valve or rotameter a PVC 12 mm tube is fitted that is connected to a container in which a mother liquor of fertilizers is prepared in advance.
As the flow passage decreases the valve closes the pressure between the inlet and outlet of the injector. At a pressure difference of 0.7 to 1.1 kg / cm2 the injector starts sucking the mother liquor of fertilizers which mixes well with water in the injector and enters the irrigation system as a feed solution. In this case, the greater the pressure difference between the inlet and outlet and the lower the outlet pressure, the more intensive the absorption.
Thus, by covering or slightly opening the valve it is possible to regulate the amount of fertilizers fed into the feed solution.
If the PU is equipped with an indicator of the flow rate of the IR the process of regulation and control is greatly simplified and the operational capabilities of the PU are increased. Now this device is not blind.
Is Negotiable