Adhesive for ceramic tiles "SILA"

Is Negotiable

Contact information

Konichenko Aleksey Vladimirovich

Finansial manager
+380993769736, +380713216478
Email

Payment Types
Prepayment
Transportation Types
Automobile transport

Application: adhesive GREEN THERMO "SILA" is intended for facing of indoors undeformed concrete, brick, plastered surfaces with ceramic tiles no larger than 300x300mm and water absorption of at least 1%.

Composition: dry mineral adhesive mixture based on cement binding aggregate and modifying additives which improve the physical and mechanical properties and adhesion.

Preparation of the substrate: preparation of the substrate is carried out in accordance with SNiP 3.04.01-87 and DBN B.2.6-22-2001. The substrate must be strong enough, free from dust, dirt, lime, oils, grease, wax, oil or emulsion paints. Remove fragile areas of the base. Silent-absorbing substrates must be treated with one of the deep penetrating emulsions of GREEN THERMO and kept for at least 4 hours before performing the work.

Performance of works: dry mixture must be filled in a container with clean water from the calculation of 0,24-0,26 l. of water per 1 kg of the mixture while mixing by hand or mechanically until a homogeneous and elastic mass is obtained. After 5 minutes the mixture must be re-mixed and then used within 1 hour. The position of the tiles can be adjusted within 10 minutes from the moment of gluing. The thickness of the layer of the mixture must be at least 2 mm so that the glue's ability to grasp fully manifests itself. When using hand-made tiles with an uneven back, additional glue is required on the back of the tile to achieve full contact between the tile and the base. The width of the seam between the tiles should be at least 1.5mm. Do not pre-wet the tiles!

Note: work should be carried out at a substrate temperature of + 5 ° C to + 30 ° C. All the above recommendations are effective at a temperature of + 20 ° C and a relative humidity of 60%. In other conditions the time for truncation, setting and solidification of the mortar mixture can change. The mixture of GREEN THERMO "SILA" contains cement and gives an alkaline reaction interacting with water. Therefore, it is necessary to protect eyes and skin during work. In case of contact with the solution rinse immediately with water and consult a doctor.

Storage: in original sealed packaging, in dry premises 12 months from the date of manufacture indicated on the package.

Packing: a mixture of GREEN THERMO "POWER" is packed in bags of 25 kg.

Disposal: Residue the product as building debris. Dispose of the packaging as household waste.

Consumption: The unevenness of the base, the size of the tile and the qualification of the performer the consumption may be from 1.9 kg to 6 kg depending on the teeth of the spatula.

Specifications:

- Thickness of adhesive solution: ................. 2-10mm

- Mixing ratio: ............... 0,24-0,26L.water / kg

- Consumption time of the mortar mixture: ................... about 60 minutes

- open time: ................... no less than 20 minutes

- correction time: .................. no less than 10 minutes

- time of hardening of the solution: ................... in 24 hours

- Adhesion to the substrate: ................ not less than 0.5 MPa

- frost resistance: ................... no less than 50 cycles

- base temperature: ................. from + 5 ° С to + 30 ° С

- operating temperature: ................... +5 ° C to + 70 ° C

Guarantee of the manufacturer: the manufacturer guarantees the compliance of the GREEN THERMO "STRENGTH" mixture to the specified technical characteristics when carrying out the rules of transportation, storage, preparation and application, which are listed above.

The manufacturer is not responsible for misuse of the mixture.