Showing 21-25 of 122 items.

Is Negotiable

Safety valve KGC 39.280

Engineering plant “KANT”, Ltd

It is intended for using in hydraulic systems of mechanized supports. The safety valve provides compliance and protection against overloading of the rack of the section of the mechanized support under the influence of the mountain pressure by relieving a part of the working fluid from the piston cavity of the column. The valve is installed in the rack unit.

 

Working fluid - any hardly flammable hydraulic fluid category:

  • oil-water emulsion HFAE
  • water solution HFAS with a class of purity not lower than 15 that is authorized for using in coal mines and meets the requirements of the 7th Luxembourg report.

More Email About company


Is Negotiable

Crane filter

Engineering plant “KANT”, Ltd

It is designed to filter and cut off the flow of working fluid. It is installed between the collector and the control unit.

More Email About company


Is Negotiable

Hydroallocators RGC-12 and RGK-20

Engineering plant “KANT”, Ltd

They are designed for starting, stopping or changing the direction of flow of hydraulic fluid in the hydraulic systems of various mainly mountain machines when applying an external control effect that is carried out with the help of manual control.

Working fluid - any hardly flammable hydraulic fluid category:

  • HFAE Oil-water emulsion
  • Water solution HFAS with a class of purity no lower than 15 that is authorized for use in coal mines and meeting the requirements of the 7th Luxembourg report.

 

Design features of RGK-12:

  • It is interchangeable in connection sizes with distributors RSD-05 which ensures its installation on serial control units.
  • It is increased in comparison with the serial distributors. A conditional pass from 8 mm to 12 mm allows to increase the speed of fastening not less than 1.5 times.
  • It is equipped with a mechanism that ensures the fixation of the handle when moving the conveyor.
  • It has a direct unmanned control with significantly fewer parts, control effort and hydraulic losses.
  • Corrosion-resistant metals are used for the production of the distributor which ensures high reliability and resource indices.

 

Design features of RGK-20:

  • It is increased in comparison with the serial distributors. A conditional pass from 8 mm to 20 mm allows to increase the speed of fastening by at least 2 times.
  • It is equipped with a mechanism that ensures the fixation of the handle when moving the conveyor.
  • It has a direct unmanned control with significantly fewer parts, control effort and hydraulic losses.
  • Corrosion-resistant metals are used for the production of the distributor which ensures high reliability and resource indices.

More Email About company


Is Negotiable

Production. Heat treatment

Engineering plant “KANT”, Ltd

Heat treatment of parts with a length of up to 5000 mm and ø up to 1500 mm. The quenching furnace Н5м (mine) and the thermal furnace are used.

More Email About company


Is Negotiable

Production. Welding and surfacing

Engineering plant “KANT”, Ltd

It is available the surfacing of parts up to 9500 mm in length and up to 1000 mm in diameter. The following equipment is used:

  • electric arc welding equipment, protective gases and under a flux
  • Thermal cutting machine PPLd2,5-6

     To solve complex, non-standard tasks and to maximize the automation of production the KUKA KR125 welding robot is exploited. It uses the FRONIUS TPS4000 synergistic power supply. This equipment allows significantly accelerate the welding process and get evenly melted and accurate seams.

More Email About company